Indicator Post - UL & FM Approved

Indicator Post, Underground Type - UL & FM Approved

Model No: ST-0155 –
Suitable for 4″-12″ NRS Gate Valves

Field Adjustment:
1. Remove the top section from the top of the Indicator Post assembly.
2. Cut the required length off the bottom of the Standpipe for the Ground Line to match up with Standpipe Ground Line mark.
3. Set the “OPEN” and “SHUT” targets for the appropriate valve size.
4. Reattach the Top Section to the top of the Indicator Post assembly.
5. Design and dimensions are subject to change without notice.

Materials List

DET QTY. Desciption Material
1 1 Locking Wrench ASTM A126B
2 1 Operating Nut ASTM B62
3 2 Hex Nut Screw ASTM A105
4 2 Hex Nut ASTM A105
5 1 Snap Ring AISI A606
6 1 Taget Carrier Nut ASTM B62
7 4 Taget ASTM B108
8 4 Hex Cap Screw ASTM A105
9 2 Window Glass LEXAN-UM
10 2 Window Glass Gasket PTFE
11 4 Hex Cap Screw ASTM A105
12 4 Hex Nut ASTM A105
13 1 Body ASTM A536
14 6 Hex Cap Screw ASTM A105
15 6 Hex Nut ASTM A105
16 1 Base Flange ASTM A126B
17 4 Hex Cap Screw ASTM A105
18 4 Hex Nut ASTM A105
19 1 Crane Coupling ASTM A536
20 1 Cotter Pin AISI 304
21 1 Stand Pipe ASTM A53
22 1 Stem AISI 1045
23 1 Plug AISI 304
24 1 Cover ASTM A126B
25 1 Cross Recessed
Countersunk Head Screw
AISI 304
26 1 Locking Nose ASTM 307 B

 

Model No: ST-0177 –
Suitable for 14″-24″ NRS Gate Valves

Field Adjustment:
1. Remove the top section from the top of the Indicator Post assembly.
2. Cut the required length off the bottom of the standpipe for the Ground line to match up with Standpipe Ground Line Mark.
3. Set the ” OPEN” and ” SHUT” targets for the appropriate valve size.
4. Reattach the Top Section to the top of the Indicator Post assembly.
5. Design and materials are subject to change without notice.

Materials List

DET QTY. Desciption Material
1 1 Locking Wrench ASTM A536
2 1 Operating Nut ASTM B62/A351 CF8
3 2 Bolt ASTM A105
4 2 Nut ASTM A105
5 2 Flat Washer ASTM A105
6 1 Shap Ring AISI 606
7 1 Taget Carrier Nut ASTM B62
8 4 Target ASTM B108
9 4 Bolt ASTM A105
10 4 Flat Washer ASTM A105
11 2 Window Gland ASTM A307B
12 2 Window Glass LEXAN-UN STABILIZE
13 4 Gasket EPDM
14 4 Bolt ASTM A105
15 4 Spring Washer ASTM A105
16 1 Nut ASTM A105
17 6 Body ASTM A105
18 6 Bolt ASTM A105
19 1 Nut ASTM A105
20 4 Base Flange ASTM A126B
21 8 Bolt ASTM A105
22 1 Nut ASTM A105
23 1 Crane Coupling ASTM A536
24 1 Cotter Pin AISI 304
25 1 Stand Pipe ASTM A536
26 1 Stem 1″ Square AISI 1045
27 1 Plug AISI 304
28 1 Top Cover ASTM A126B
29 1 Screw AISI 304
30 1 Lock Nose ASTM A307B
31 1 Reducer PARTS
32 4 Bolt ASTM A105
33 4 Nut ASTM A105
34 1 Wrench Nut ASTM A536
35 1 Washer AISI 304
36 1 Hex. Socket Cap
Screw
AISI 304
37 4 Spring Washer AISI 304

 

Indicator Post, Wall Type - UL & FM Approved

Model No: ST-0166 – Suitable for 4″-12″ NRS Gate Valves

 

Field Adjustment:
1. Remove the top section from the top of the Indicator Post assembly.
2. Set the ” OPEN” and ” SHUT” targets for the appropriate valves size.
3. Reattach the Top Section to the top of the Indicator Post assembly.
4. Design and dimensions are subject to change without notice.

Materials List

DET QTY. Desciption Material
1 1 Lifting Eyey Bolt ASTM A105
2 1 Hex Nut ASTM A105
3 1 Washer ASTM A105
4 1 Hand Wheel ASTM A536
5 1 Operating Nut ASTM B62
6 2 Hex Cap Screw ASTM A105
7 2 Hex Nut ASTM A105
8 1 Snap Ring AISI A606
9 1 Target Carrier Nut ASTM B62
10 4 Target ASTM B108
11 4 Hex Cap Screw ASTM A105
12 2 Window Glass LEXAN-UM
13 2 Window Glass Gasket PTFE
14 4 Hex Cap Screw ASTM A105
15 4 Hex Nut ASTM A105
16 1 Body ASTM A536
17 1 Stand Pipe ASTM A53
18 1 Stem AISI 1045
19 1 Cotter Pin AISI 304
20 1 Crane Coupling ASTM A536
21 1 Plug AISI 304
22 1 Cover ASTM A126B
23 1 Cross Recessed
Countersunk Head Screw
AISI 304
24 1 Locking Nose ASTM A307B